- 9,500 INR
- 250 VAC Volt (V)
- -20 - 60 Celsius (oC)
- 15 A Ampere (amp)
- 15 A / 250 V AC Volt per ampere (V/A)
- 250 VAC Volt (V)
- -20 to 60 Celsius (oC)
- 142 membrane diameter
- 0.48 Kilograms (kg)
Versatile membrane level indicator. Is to be used to control the maximum or minimum level of bulk solids in silos or vessels. These controllers consist of a switch actuated by a membrane and it is recommended for dusty and powdery, granulated and grainy bulk goods like dust, flour, grain, sand, plastic, etc. with an easy flow and a bulk density from 0.3 to 2.5 t/m3.
The membrane must to be exposed to the material. The movement of the switch is the result of the pressure exerted by the incoming bulk material against the membrane which forces the membrane to move backwards, reversing the position of the switch and the signal is used for example to control the transport system in the silo.
Tightening the regulation nut to reduce the sensitivity and increase the strain of the material to activate the microswitch. Clockwise insensitive.
The models are adjusted at their maximum sensitivity. It is necessary to ensure the proper pressure to the membrane that returns the membrane when there is no product covering it.
Drill holes in the silo or vessel and mount the indicator using screws, rods, fasteners or nuts M6 making sure of the easy flow of the material and ensure that the product leaves the membrane without product on it.
CD Standard Ambient Temperature
-20 to +60 Deg C
IP53 / IP40 depending on the position of the cable gland
250 V AC
Glass reinforced Polyester (Under request Aluminium)
CD with Aluminium Housing Weight
CD with Aluminium Housing Ambient temperature
-25 to +80 Deg C
CD Standard Weight
- All India
SHOP NO: 303-304, BLOCK - C, 3RD FLOOR, PUSHP BUSINESS CAMPUS, S P RING ROAD, VASTRAL, Ahmedabad, Gujarat, 382418, India